2009 Toyota Exhaust System Kit Parts

Choose a Model for your 2009 Toyota


Showing 1 - 10 of 80 products
Image
SKU
Product
Rating
Price

Magnaflow
  • Single Passenger Side Rear Exit
  • Overland Series Stainless Cat-Back System
  • Overland Series Stainless Cat-Back System
  • Product Attributes:
    • Muffler Type Position Left: Straight-through
    • Hangers Included: Yes
    • Muffler Size Position Left: 5x11x22
    • Exit Style: Single Passenger Side Rear
    • Muffler Quantity: 2
    • Mounting Bracket Included: No
    • Subtitle: Cat-back
    • Main Piping Diameter: 2.5
    • Muffler Type Position Right: Tuned Chamber
    • Muffler Size Position Right: 4x4x6
    • Muffler Finish: Satin
    • Valve Included: No
    • Clamp Type: Band Clamp
    • Inlet Connection Type: Bolt-on

Additional Fitment Information:
Vehicle Block CC Engine CID
2009 - Toyota 4Runner V 3956 6 Cyl 4.0L 241

Magnaflow
  • Single Passenger Side Rear Exit
  • Overland Series Stainless Cat-Back System
  • Overland Series Stainless Cat-Back System
  • Product Attributes:
    • Main Piping Diameter: 2.5
    • Muffler Type: Straight-through
    • Muffler Finish: Satin
    • Valve Included: No
    • Hangers Included: Yes
    • Muffler Size: 5x8x18
    • Exit Style: Single Passenger Side Rear
    • Clamp Type: Band Clamp
    • Inlet Connection Type: Bolt-on
    • Mounting Bracket Included: No
    • Subtitle: Cat-back

Additional Fitment Information:
Vehicle Block CC Engine CID
2009 - Toyota 4Runner V 4663 8 Cyl 4.7L 285

MBRP Exhaust
  • Armor Lite Cat Back Exhaust System
  • 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipes/Tailpipe/Hardware/4 in. OD Tip; Single Side Exit; Aluminized
  • Armor Lite Cat Back Exhaust System; 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipes/Tailpipe/Hardware/4 in. OD Tip; Single Side Exit; Aluminized;
  • Installer Series Cat Back Exhaust System
  • Product Attributes:
    • Tail Pipe Diameter: 2.500 In.
    • Tubing Diameter: 2.500 In.
    • Exhaust Type: Cat-back
    • Exit Position: Single Side
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message:
      • Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
      • Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Inside Diameter: 2.500 In.
  • Features:
    • Heavy Duty Aluminized Steel
    • Built To Perform
    • Dyno Driven
    • Easy Installation
  • THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn't see much precipitation, or if you're looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle Block CC Engine CID
2009 - Toyota 4Runner V 3956 6 Cyl 4.0L 241

MBRP Exhaust
  • 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipes/Tailpipe/Hardware/4 in. OD Tip; Single Side Exit; Aluminized;Meets EPA Standards
  • Armor Lite Cat Back Exhaust System; 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipes/Tailpipe/Hardware/4 in. OD Tip; Single Side Exit; Aluminized;
  • Armor Lite Cat Back Exhaust System
  • Product Attributes:
    • Tail Pipe Diameter: 2.500 In.
    • Tubing Diameter: 2.500 In.
    • Exhaust Type: Cat-back
    • Exit Position: Single Side
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
    • Inlet Inside Diameter: 2.500 In.
  • Features:
    • Heavy Duty Aluminized Steel
    • Built To Perform
    • Dyno Driven
    • Easy Installation
  • THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn't see much precipitation, or if you're looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle Block CC Engine CID
2009 - Toyota 4Runner V 3956 6 Cyl 4.0L 241

Borla
  • 2.25 in.; Includes Mufflers/Hardware/4.25 in. x 3.5 in. Oval x 7 in. Long Single Rolled Angle-Cut Tip; Right Rear Exit;50 State Legal / California Emissions Compliant T-304 Stainless Steel
  • S-Type Axle-Back Exhaust System; 2.25 in.; Includes Mufflers/Hardware/4.25 in. x 3.5 in. Oval x 7 in. Long Single Rolled Angle-Cut Tip; Right Rear Exit;
  • S-Type Axle-Back Exhaust System
  • Product Attributes:
    • Tail Pipe Diameter: 2.250 In.
    • Tubing Diameter: 2.250 In.
    • Exhaust Type: Axle-back
    • Exit Position: Rear
    • Tip Diameter: 3.500 In. X 4.250 In.
    • WARNING CA Proposition 65: Yes
    • Inlet Inside Diameter: 2.250 In.
  • Features:
    • Made From High-Quality T-304 Austenitic Stainless Steel
    • Mandrel Bent Pipes
    • Ensures Consistent Diameter Through Each Curve
    • Mufflers Have No Baffles/Chambers
    • Produces High Velocity
    • Million Mile Warranty
  • A Borla 'Axle Back' or rear section exhaust implies the exhaust system is located behind the vehicle rear axle . Most installations are completed in less than an hour and require no cutting of the factory system. A Borla Axle Back performance exhaust is a less restrictive aftermarket exhaust system that will improve the sound level both inside the cabin and exterior. Borla Axle Back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year/make/model vehicle.

Additional Fitment Information:
Vehicle Block CC Engine CID
2009 - Toyota Corolla L 1798 4 Cyl 1.8L 110

Magnaflow
  • Dual Same Side Behind Passenger Rear Tire Exit
  • Street Series Stainless Cat-Back System
  • Street Series Stainless Cat-Back System
  • Product Attributes:
    • Main Piping Diameter: 2.5
    • Muffler Type: Straight-through
    • Tip Diameter: 3 X 3.75
    • Muffler Finish: Satin
    • Tip Finish: Polished
    • Tip Shape: Rectangle
    • Exit Style: Dual Same Side Behind Passenger Rear Tire
    • Tip Length: 7.25
    • Tip Type: Welded;double Wall;straight Cut;rolled Edge
    • Inlet Connection Type: Bolt-on
    • Subtitle: Cat-back

Additional Fitment Information:
Vehicle Block CC Engine CID
2009 - Toyota 4Runner V 3956 6 Cyl 4.0L 241

MagnaFlow Performance Exhaust
  • Single Passenger Side Rear Exit
  • Overland Series Stainless Cat-Back System
  • Overland Series Stainless Cat-Back System

Additional Fitment Information:
Vehicle Block CC Engine CID
2009 - Toyota 4Runner V 3956 6 Cyl 4.0L 241

Magnaflow
  • Single Straight Passenger Side Rear Exit
  • Street Series Stainless Cat-Back System
  • Street Series Stainless Cat-Back System
  • Product Attributes:
    • Muffler Type: Straight-through
    • Hangers Included: Yes
    • Tip Finish: Polished
    • Exit Style: Single Straight Passenger Side Rear
    • Tip Length: 8.25
    • Tip Type: Welded-on;double Wall;angle Cut;rolled Edge
    • Mounting Bracket Included: No
    • Subtitle: Cat-back
    • Main Piping Diameter: 2.5
    • Tip Diameter: 3.75 X 4.75
    • Muffler Finish: Satin
    • Valve Included: No
    • Muffler Size: 5x11x22
    • Tip Shape: Oval
    • Clamp Type: Band Clamp
    • Inlet Connection Type: Bolt-on

Additional Fitment Information:
Vehicle Block CC Engine CID
2009 - Toyota FJ Cruiser V 3956 6 Cyl 4.0L 241

MBRP Exhaust
  • 3 in.; Includes Ext. Pipes/Muffler/Over Axle Pipe/Tailpipe/Hardware/4 in. OD Tip; Single Side Exit; Aluminized;Meets EPA Standards
  • Armor Lite Cat Back Exhaust System; 3 in.; Includes Ext. Pipes/Muffler/Over Axle Pipe/Tailpipe/Hardware/4 in. OD Tip; Single Side Exit; Aluminized;
  • Armor Lite Cat Back Exhaust System
  • Product Attributes:
    • Exhaust Type:
      • Cat-back
      • Single
    • Muffler Type: Straight-through
    • Exit Position: Single Side
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
    • Exit Style: Straight
  • Features:
    • Improved Torque And Horsepower
    • Lower Exhaust Gas Temperatures
    • Increased Throttle Response
    • Mellow Exhaust Note
    • Bolt On Design
    • Utilizes OEM Hangers
    • Stainless Steel Tips Are Included
    • 3 Year Warranty
  • THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn't see much precipitation, or if you're looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle Block CC Engine Bed Length Body CID
2009 - Toyota Tundra V 5663 8 Cyl 5.7L 66.7 Crew Cab Pickup 345

MBRP Exhaust
  • Armor Lite Cat Back Exhaust System
  • 3 in.; Includes Ext. Pipes/Muffler/Over Axle Pipe/Tailpipe/Hardware/4 in. OD Tip; Single Side Exit; Aluminized
  • Armor Lite Cat Back Exhaust System; 3 in.; Includes Ext. Pipes/Muffler/Over Axle Pipe/Tailpipe/Hardware/4 in. OD Tip; Single Side Exit; Aluminized;
  • Installer Series Cat Back Exhaust System
  • Product Attributes:
    • Exhaust Type:
      • Cat-back
      • Single
    • Muffler Type: Straight-through
    • Exit Position: Single Side
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message:
      • Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
      • Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm - Www.p65warnings.ca.gov
    • Exit Style: Straight
  • Features:
    • Improved Torque And Horsepower
    • Lower Exhaust Gas Temperatures
    • Increased Throttle Response
    • Mellow Exhaust Note
    • Bolt On Design
    • Utilizes OEM Hangers
    • Stainless Steel Tips Are Included
    • 3 Year Warranty
  • THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn't see much precipitation, or if you're looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle Block CC Engine Bed Length Body CID
2009 - Toyota Tundra V 5663 8 Cyl 5.7L 97.6 Extended Crew Cab Pickup 345
Showing 1 - 10 of 80 products

Loading...